Dayton Wheel Conversion - chat

What do i need to make this work?

I just picked up a set of 8. 25x22. 5 rims and will be mounting 11rx22. 5's.

I have a 1986 international s1600 with 9x20's right now.

Apparently you can use this center section on.

Do you have an old trailer with dayton style (mobile home) hubs?

I have bought a 1984 b60 chevy bus that has dayton style wheels on it with 9. 00 20's and want to swap to 10 r22. 5 tires since the 20's are unobtainum anymore.

I'm looking to replace both the drives & steering.

No one has the adapters to mount the tire on a spin balancer.

I acquired a '87 ford l8000 that is in really nice shape except that i hate the looks and.

You need 8. 25x22. 5 wheel for 11r22. 5.

After 10 years, i decided to upgrade.

If i'm understanding what you want to do correctly you can just take the inside tire off the wheel.

Those have an inner wheel a spacer ring and an outer wheel.

Tubetype 20″ dayton wheels can be replaced by 22. 5 tubeless dayton wheels without changing any of the mounting hardware & using the same hub.

You can still get new dayton rims in the 22. 5 size for about 150 a piece, or you can find set of used.

This same conversion works for 15″ tubetype going to 17. 5″ tubeless & 22″ tubetype going to 24. 5″ tubeless.

You have a gunite hub look here and you will find a conversion request from gunite at the bottom of the page.

There is alot more to converting hubs than just the bearings.

Balancing a dayton rim is impossible around the kansas city area using a spin balancing machine.

After researching the possible issues with the dayton style wheels, i have decided that for my peace of mind, i will change out the hubs, wheels and brakes (brakes only on one.

11r22. 5 is direct replacement for 10. 00r20.

My question is, how much trouble and at what cost am i looking at to change them over to budds.

Hey all, i am new to this forum but am a diesel mechanic by trade and a driver by choice.

Tubetype 20″ dayton wheels can be replaced by 22. 5 tubeless dayton wheels without changing any of the mounting hardware & using the same hub.

📸 Image Gallery

I'd like to switch to a 22. 5 setup when it comes time to get tires.

If you took the.

I was blowing tires out every time i used this trailer!

Dayton wheel to 10 lug conversion.

This same conversion works for 15″.

Hello gents, i have a 92 ih bus with 22. 5 dayton wheels.

10x20 tires still available here but i just changed to tubeless.

I have looked at the offerings by accuride but the recommended.

If you don't mind keeping the dayton wheels it's cheap and easy to go to 11r or low pro 22. 5.

I can't seem to locate a suitable wheel based on a modern conversion.

Idk that tires will be.

You can upgrade your tire/rim combo to a 22. 5 single piece rim very easily.

Does anyone know what the options are for converting the hubs on a older chevy medium duty to modern 22. 5 wheels?

Buy a bus with budd wheels and air brakes, and swap in your stick shift if you like.